ROMAN manufactures the industry's most trusted wallcovering adhesives, primers, and removers in USA & the world. Professional wallcovering installers and DIYers rely on ROMAN products to provide the exceptional quality and performance they depend on.
From clear, to clay, to specialty – ROMAN offers a variety of adhesives for every project type. Professionals and DIYers alike choose ROMAN adhesives for their superior performance, exceptional ease of use, and unmatched quality.
Product Information
General Properties: Premium clear, strippable wallcovering adhesive. PRO-880 is excellent for the retail customer as well as the most discriminating contractor. Undiluted PRO-880 will hang Type II and Type III wallcoverings, and may be diluted for use with lightweight and pre-pasted wallcoverings.
- • Maximum wet-tack
- • Machinable
- • Extended open time
- • Ease of clean up
- • LEED compliant
- • Strippable with most fabric-back wallcoverings
- • Spreads and flows easily
Recommended Uses: For all weights of wallcoverings. Strippable when used with fabric-backed vinyl over bare drywall with a cure time of six weeks.
Compatible Coatings:All ROMAN® primers
Mildew-Resistant: All Roman products contain biocides for in-can preservation
Application Instructions
Surface Preparation: Surface must be free from grease and other residues, dry, smooth and structurally sound. Check surfaces for paint bonding, loose wallcoverings, damaged wallboard or plaster. Repair all unsound surfaces.
Dilution: May be diluted with up to one pint of clean water per gallon. DO NOT OVER DILUTE.
Application Method:Use only when the room temperature is above 50°F. Apply an even coat of adhesive with a pasting machine or roller. Book wallcovering according to the manufacturer's instructions.
Clean-Up: Before the adhesive dries, remove any excess with clean water. Additional effort may be required if the adhesive is allowed to contact the surface of embossed or textured vinyls.
Warning
If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Roman Decorating Products, LLC does not endorse the use of any product in an installation that does not meet a Class A fire rating or any applicable code.
Limited Warranty
Roman Decorating Products, LLC warrants that it will replace this product free of charge, if, within 12 months of manufacture, it is found to be defective in material or workmanship. This warranty is in lieu of any other. The exclusive remedy is limited to the replacement of the product.
Caution
Store in a cool, dry place. DO NOT FREEZE! Do not take internally. Avoid contact with skin and eyes. Use of skin and eye protection is recommended at all times. Do not mix with other chemicals. Use in a well-ventilated work area. Close container after each use. Keep out of reach of children.
Specification Data
Percent Solids: Approximately 32%
Coverage: Up to approx. 330 square feet per gallon
Viscosity: Approximately 40,000 - 45,000 cps
VOC (actual/regulatory): 0% / 0 g/L as calculated per EPA Method 24
Storage: Avoid freezing; keep in cool, dry place
Drying Time: Will vary depending on temperature, ventilation and humidity